1 130hf(r) series stud version standard recovery diodes 130 a bulletin i2019 rev. a 07/94 www.irf.com features high current carrying capability high surge current capability types up to 1200v v rrm stud cathode and stud anode version standard jedec types diffused junction typical applications battery chargers converters power supplies machine tool controls case style do-205ac (do-30) i f(av) 130 a @ t c 125 c i f(rms) 200 a i fsm @ 50hz 2000 a @ 60hz 2100 a i 2 t@ 50hz 20 ka 2 s @ 60hz 18 ka 2 s v rrm range 400 to 1200 v t j -40 to 180 c parameters 130hf(r) units major ratings and characteristics
130hf(r) series 2 bulletin i2019 rev. a 07/94 www.irf.com voltage v rrm , maximum repetitive v rsm , maximum non- i rrm max. type number code peak reverse voltage repetitive peak rev. voltage @ 180c vvma 40 400 500 130hf(r) 80 800 900 15 120 1200 1300 i f(av) max. average forward current 130 a 180 conduction, half sine wave @ case temperature 125 c i f(rms) max. rms forward current 200 a dc @ 115c case temperature i fsm max. peak, one-cycle forward, 2000 t = 10ms no voltage non-repetitive surge current 2100 t = 8.3ms reapplied 1680 t = 10ms 100% v rrm 1760 t = 8.3ms reapplied sinusoidal half wave, i 2 t maximum i 2 t for fusing 20 t = 10ms no voltage initial t j = t j max 18 t = 8.3ms reapplied 14 t = 10ms 100% v rrm 13 t = 8.3ms reapplied i 2 ? t maximum i 2 ? t for fusing 200 ka 2 ? s t = 0.1 to 10ms, no voltage reapplied v f(to)1 low level value of threshold voltage v f(to)2 high level value of threshold voltage r f1 low level value of forward slope resistance r f2 high level value of forward slope resistance v fm max. forward voltage drop 1.5 v i pk = 500a , t j = 25 c parameter 130hf(r) units conditions forward conduction 0.76 (16.7% x p x i f(av) < i < p x i f(av) ), t j = t j max. 0.95 (i > p x i f(av) ), t j = t j max. 1.41 (16.7% x p x i f(av) < i < p x i f(av) ), t j = t j max. 1.02 (i > p x i f(av) ), t j = t j max. ka 2 s a v m w electrical specifications voltage ratings
130hf(r) series bulletin i2019 rev. a 07/94 www.irf.com 3 parameter 130hf(r) units conditions c t j max. operating temperature range -40 to 180 t stg max. storage temperature range -55 to 180 r thjc max. thermal resistance, junction to case 0.3 dc operation r thcs max. thermal resistance, case to heatsink 0.08 mounting surface, smooth, flat and greased t max. allowed mounting torque +0 -20% 11 not lubricated threads 10 lubricated threads wt approximate weight 120 g case style do-205ac(do-30) see outline table k/w nm thermal and mechanical specification d r thjc conduction (the following table shows the increment of thermal resistence r thjc when devices operate at different conduction angles than dc) 180 0.052 0.042 t j = t j max. 120 0.064 0.070 90 0.083 0.090 k/w 60 0.117 0.120 30 0.177 0.180 conduction angle sinusoidal conduction rectangular conduction units conditions ordering information table 130 hf r 120 p b v 1 23 4 5 6 device code 1 - essential part number 2 - diode 3 - none = stud normal polarity (cathode to stud) r = stud reverse polarity (anode to stud) 4 - voltage code: code x 10 = v rrm (see voltage ratings table) 5 - p = stud base do-205ac(do-30) 1/2" 20unf-2a m= stud base do-205ac(do-30) m12x1.75 6 - b = flag top terminals (for cathode/ anode leads) s = isolated lead with silicone sleeve (red = reverse polarity; blue = normal polarity) none = not isolated lead 7 - v = glass-metal seal 7
130hf(r) series 4 bulletin i2019 rev. a 07/94 www.irf.com outline table do-205ac (do-30) flag all dimensions in millimeters (inches) glass-metal seal max. 21 (0.82) max. 16.5 (0.65) 6.5 (0.26) min. dia. 8.5 (0.33) nom. 157 (6.18) 55 (2.16) min. dia. 23.5 (0.93) max. 24 (0.94) max. sw 27 * for metric device: m12 x 1.75 170 (6.69) 1/2"-20unf-2a* 1 2.5 ( 0.4 9) max. c.s. 16mm 2.6 (0.10) max . 2 35 (1.38) max. (0.015 s.i.) max. glass-metal seal max. 21 (0.82) max. dia. 23.5 (0.93) max. 24 (0.94) 12.5 (0.49) 16.5 (0.65) 5.6 (0.22) dia. 5.54 (0.22) 2.4 (0.09) 27 (1.06) 41 (1.61) max. 9.5 (0.37) *for metric device. m12 x 1.75 36.5 (1.44) 1/2"-20unf-2a* conforms to jedec do-205ac (do-30) all dimensions in millimeters (inches)
130hf(r) series bulletin i2019 rev. a 07/94 www.irf.com 5 fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics 110 120 130 140 150 160 170 180 0 20406080100120140 30 60 90 120 180 average forward current (a) conduction angle 130hf(r) series r (dc) = 0.3 k/w maximum allowable case t emperature ( c) thjc 110 120 130 140 150 160 170 180 0 40 80 120 160 200 240 dc 30 60 90 120 180 conduction period 130hf(r) series r (dc) = 0.3 k/w thjc maximum allow able case temperatur e ( c) average forward current (a) fig. 3 - forward power loss characteristics 0 20 40 60 80 100 120 140 160 180 maximum allowable ambient temperature ( c) r = 0 . 1 k / w - d e l t a r t h s a 0 . 2 k / w 0 . 3 k / w 0 . 4 k / w 0 . 5 k / w 0 . 6 k / w 0 . 8 k / w 1 k / w 1 . 2 k / w 0 20 40 60 80 100 120 140 160 180 0 20 40 60 80 100 120 140 180 120 90 60 30 rms limit conduction angle maximum average forward power loss (w) average forward current (a) 130hf(r) ser ies t = 180c j fig. 4 - forward power loss characteristics 0 20 40 60 80 100 120 140 160 180 maximum allowable ambient temperature ( c) r = 0 . 1 k / w - d e l t a r t h s a 0 . 2 k / w 0 . 3 k / w 0 . 4 k / w 0 . 6 k / w 0 . 8 k / w 1 k/ w 1 . 2 k / w 0 .5 k/w 0 40 80 120 160 200 240 0 40 80 120 160 200 240 dc 180 120 90 60 30 rms limit conduction period m aximum aver age forward power loss (w) average forward current (a) 130hf(r) series t = 180c j
130hf(r) series 6 bulletin i2019 rev. a 07/94 www.irf.com fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 400 600 800 1000 1200 1400 1600 1800 110100 number of equal amplitude half cycle current pulses (n) peak half sine wave forward current (a) in itial t = 180 c @ 60 hz 0.0083 s @ 50 hz 0.0100 s j 130hf(r) ser ies at any rated load condition and with rated v applied following surge. rrm 400 600 800 1000 1200 1400 1600 1800 2000 0.01 0.1 1 pulse train duration (s) peak half sine wave forward current (a) in itial t = 180 c no voltage reapplied rated v reapplied rrm maximum non repetitive surge current j 130hf(r) series versus pulse train duration. fig. 7 - forward voltage drop characteristics 10 100 1000 10000 012345 t = 25 c j instantaneous forward voltage (v) instantaneous forward current (a) 130hf(r) series t = 180c j fig. 8 - thermal impedance z thjc characteristics 0.01 0.1 1 0.001 0.01 0.1 1 10 square wave pulse durat ion (s) thjc tran sient thermal impedan ce z (k/w) steady state value: r = 0.3 k/w (dc operation) thj c 130hf(r) series
|